6. Select the: sm282-EU.hex-file in the Firmware folder.
7. Installation of Phase 1
Phase 1
Phase 1 is completed when the bar reaches 100 %
Phase 1
Phase 2. Activating the Spectrum
Phase 2. Activating the Spectrum- - - - analyzer function.
Phase 2. Activating the Spectrum
Phase 2. Activating the Spectrum
Notice, this step requires an Internet-connection.
1. Start by inserting the CD into the computer . Open up the CD-library/folders.
2. Connect the instrument and the PC with the serial-cable (RS232).
Notice that the instrument must be turned off.
Notice
Notice
Notice
3. There is a folder in CD-library called; -Unlock. Enter this folder.
4. Run the file: keygenNET.EXE (double click the left mouse-button).
- select input port on the computer (normally Com1 or Com2).
5. And do the following:
analyzer function.
analyzer function.
analyzer function.