Advertisement
Please follow the instruction below (step by step).
Please follow the instruction below (step by step).
Please follow the instruction below (step by step).
Please follow the instruction below (step by step).
Phase 1. Downloading of new G2- - - - software.
Phase 1. Downloading of new G2
Phase 1. Downloading of new G2
Phase 1. Downloading of new G2
1. Start by inserting the CD into the computer. Open up the CD-library/folders.
2. Connect the instrument and the PC with the serial-cable (RS232).
Notice that the instrument must be turned off.
Notice
Notice
Notice
3. There is a folder in CD-library called; -“Firmware”. Enter this folder.
4. Run the file: “FDL.EXE” (double click the left mouse-button).
- select input port on the computer (normally Com1 or Com2).
- Click: “Send Firmware”.
5. And do the following::
software.
software.
software.
Advertisement
