Page 2
Please follow the instruction below (step by step). Please follow the instruction below (step by step). Please follow the instruction below (step by step). Please follow the instruction below (step by step). Phase 1. Downloading of new G2- - - - software. Phase 1.
Page 3
6. Select the: sm282-EU.hex-file in the Firmware folder. 7. Installation of Phase 1 Phase 1 Phase 1 is completed when the bar reaches 100 % Phase 1 Phase 2. Activating the Spectrum Phase 2. Activating the Spectrum- - - - analyzer function. Phase 2.
Page 4
You have problems upgrading Your meter. • The Authentication nr can be used for any Satlook Micro. However, when used by a meter this number will be locked to that meter and can not be used with any other meter.