Conventional Scanning - Uniden UBC396T Owner's Manual

174 205 212 223
245 246 251 252
266 271 274 306
332 343 346 351
411 412 413 423
452 454 455 462
506 516 523 526
612 624 627 631
703 712 723 731

Conventional Scanning

Conventional scanning is a relatively simple concept.
Each group of users in a conventional system is
assigned a single frequency (for simplex systems) or
two frequencies (for repeater systems). Any time one
of them transmits, their transmission always goes out
on the same frequency. Up until the late 1980s, this
was the primary way that radio systems operated.
Even today, there are many 2-way radio users who
operate using a conventional system:
• Aircraft
• Amateur radio
• FRS/GMRS users
• Broadcast AM/FM/TV stations
• Many business radio users
When you want to store a conventional system, all you
need to know is the frequencies they operate on.
When you are scanning a conventional system, the
scanner stops very briefly on each channel to see if
there is activity. If there isn't, the scanner quickly
moves to the next channel. If there is, then the
scanner pauses on the transmission until it is over.
22
225 226 243
255 261 263
311 315 325
356 364 365
431 432 445
464 465 466
532 546 565
632 654 662
732 734 743
Understanding Scanning
244
265
331
371
446
503
606
664
754