Kohler WELLCOMME K-4349T Installation Instructions

Please read these instructions carefully to familiarize yourself
with the required tools, materials, and installation sequences.
Follow the sections that pertain to your particular installation .
This will help you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
All information in these instructions is based upon the latest
product information available at the time of publication. Kohler
China reserves the right to make changes in product
characteristics, packaging, or availability at any time without
notice.
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
Wellcomme Rear Spud Toilet ......................................K-4349T
Includes Seat.........................................................K-4670T
Includes Bowl ........................................................K-4349T
Wellcomme Top Spud Toilet ........................................K-4350T
Includes Seat.........................................................K-4670T
Includes Bowl ........................................................K-4350T
Highcliff Rear Spud Toilet ............................................K-4367T
Includes Seat.........................................................K-4670T
Includes Bowl ........................................................K-4367T
Highcliff Top Spud Toilet ..............................................K-4368T
Includes Seat.........................................................K-4670T
Includes Bowl ........................................................K-4368T
Service Parts
38mm closet spud assy.............................................18357
Bolt Cap Accessory Pack ...................................1013092-0
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
57mm (2") passageway.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm (12") roughing-in
dimension. See Fig. #1.
·
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts and nuts are
overtightened, or if carelessly handled.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #4 for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ANSI Standards (A112.19.2M).
WARNING: Risk of external leakage.
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten 1/4 turn past
finger tight.
1007282-2-A
S-EB 305mm K-4349T/K-4350T S-EB 305mm K-4367T/K-4368T
38mm
·
·
·
57mm
·
254mm 305mm
·
·
·
Fig. #1
·
A112.19.2M
The fill valve
-1-
HIGHCLIFF
WELLCOMME
INSTALLATION INSTRUCTINS
VITREOUS CHINA COMMERCIAL TOILETS
........................................................K-4349T
................................................................K-4670T
................................................................K-4349T
........................................................K-4350T
................................................................K-4670T
................................................................K-4350T
................................................K-4367T
................................................................K-4670T
................................................................K-4367T
................................................K-4368T
................................................................K-4670T
................................................................K-4368T
..........................................................18357
......................................................1013092-0
TM
TM
-
279mm( 1)
(ANSI)