Data Sources - BRP Evinrude E-TEC Icon Pro Series User Manual

DATA SOURCES

Use the DATA SOURCES menu to set up to five analog senders for
Speed, Sea Water temperature and Air Temperature. Refer to the current
ICON Gauge Installation Guide for installation instructions. To enter the
data sources menu:
1.) Press the MODE button once.
2.) Use the UP or DOWN buttons to select EDIT MENU.
3.) Press and hold the MODE button to enter the selection.
4.) Use the UP or DOWN buttons to select DATA SRCS.
5.) Press and hold the MODE button to enter the selection.
010151
010152
123