Lockout Tips - Uniden UBC 245XLT Trunk Tracker II Operating Manual

Lockout in Scanning Mode
If the scanner keeps stopping on a particular channel due
to noise or too frequent transmissions, you may want to
remove that channel from scanning.
1. Wait until the scanner
stops at the channel.
2. Then press
3. The scanner
immediately resumes
scanning because the
locked out channel is
no longer in the
scanning sequence.

Lockout Tips

n To quickly lockout a series of channels, start with
the lowest number channel.
For example, if you are locking out channels 4, 7,
8, 12, and 15, start with Channel 4. After selecting
channel 4, press
times to step up to the next channel to be
locked out.
n Record the locked-out channels in some
convenient place so you can restore them.
.
. Then press
24
1 2 3 4 5 6
1 2 3 4 5 6
one or more
7 8 9 10
7 8 9 10