Basic Operation; Turn The Scanner On; Setting The Squelch - Uniden UBC 245XLT Trunk Tracker II Operating Manual

Note: Fold out the Front Cover to see the Controls and
Indicators while reading this Guide.

Turn the Scanner On

Turn the VOLUME control clockwise out of the detent
position. u bc245 flashes twice in the display. The scanner
automatically starts scanning.

Setting the Squelch

To set the squelch, you must be in the Manual mode, and
you should not be receiving a signal on your scanner.
1. Press
not hear a signal.
2. Make sure that the
VOLUME is set to a
comfortable listening
level.
3. Think of the Squelch Control as a gate. Turn
SQUELCH fully counter-clockwise. This raises the
"Squelch Gate" so high that only very strong signals
can get through.
4.
Turn SQUELCH fully clockwise until you hear a hiss.
This lowers the "Squelch Gate" so that everything
gets through—noise, weak signals, and strong
signals.

Basic Operation

until you do
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
14