Safety Symbols; General Description; Name Plate And Warning Decal - Big Joe P33 Operator's Manual

WARNING and CAUTION are both signal words intended to alert the viewer to
the existence and relative degree of a hazard. They are both preceded by a safety
alert symbol consisting of an exclamation mark enclosed by a triangle.
A Warning indicates a hazard which could result in injury or death if proper pre-
cautions are not taken.
A Caution indicates a reminder of routine safety practices.
A prohibition slash (circle with diagonal slash through it) indicates a procedure or
action that should not be performed under any circumstances, as both personal
injury and/or damage to equipment will result.
Big Lift LLC Pallet trucks lift and trans-
port loads on rigid forks.
Controls for steering, braking, for-
ward and reverse travel, horn, lift,
lower and speed control are all
located on the control handle.
Name plate and warning decal loca-
tions may vary between models, but
they are always near the steering arm
within sight of the operator.
If the name plate or warning decal is
lost or damaged they should be
replaced immediately.
supervisor or the designated author-
ity contact Big Lift LLC Authorized
Dealer for replacement.

SAFETY SYMBOLS

GENERAL DESCRIPTION

NAME PLATE AND WARNING DECAL

Have
Trucks in this series may vary in load
capacity, battery arrangement, and
instrumentation, depending on model
and options.
The name plate shows the model
number, serial number, and truck
type. Battery type, with voltage and
minimum weight, is shown along with
information on the load capacity and
load center.
your The warning decal contains warnings
which also appear, with illustrations, in
the Operation section of this manual.
2