Related Manuals for Akiles ProLamULTRA-X6
Summary of Contents for Akiles ProLamULTRA-X6
- Page 1 ProLam ULTRA-X6 / XL 6 Roller Heavy Duty Pouch Laminator Operation Manual Make sure you read this manual before using the machine. Store this guide safely, so that you can use it in the future.
- Page 2 1. Specifications Max. Laminating Width 13” (330 mm) 18.9” (480mm) Max. Laminating Speed 59” / min 47” / min Max. Pouch Thickness 14 mil (350 mic) Max. Laminating Thickness 1/8” (3 mm) Heating System 4 Heated Rollers Q’ty of Roller Operating Temp 32℉...
- Page 3 3. Safety Precautions WARNING Do not allow neckties, scarves, or other objects near the machine, as they could get caught by the rollers and be pulled inside, causing serious personal injury. 2. To prevent possibility of electrical shock, do not immerse machine in water or permit liquid to spill inside.
- Page 4 5. Lamination Guide Temperature and Speed Settings Film Paper (20lb) Temp (℉) Speed 3mil Copy 5mil Copy 7mil Copy 10mil Copy 14mil Copy * These are recommended settings. Temperature & speed adjustments may be required for different melting pouches, substrates, or carriers.
- Page 5 6. How to Use Turn the switch on behind the machine. If it is not the first use, Hold the POWER button. Hot Lamination Press the HOT button. Initial setting is 212°F and speed 6. The machine will start to heat up and the hot icon will flicker. When the machine reaches the set temperature, it will beep 3 times.
- Page 6 7. Description of Control Panel COLD ON/OFF: Press TEMP SPEED POWER for 1 Second POWER MEAS STOP REVERSE Forward (Motor) Cooling Fan Reverse (Motor) Measurement : Start Hot Lamination ● COLD : Start Cold Lamination ● TEMP ▲▼ : Modify temperature ( 32℉ ~ 284℉ ) ●...
- Page 7 Turn off the switch and between the heated rollers Emergency state contact support or they are out of position 9. After Sales Service Information If you have any problem that can’t be solved on your end, please contact Akiles technical support (909)923-7778 or www.akiles.com...
Need help?
Do you have a question about the ProLamULTRA-X6 and is the answer not in the manual?
Questions and answers