Kohler K-2282 Installation Manual page 3

Before You Begin (cont.)
For replacement installations, make sure the existing cutout is the
same size or smaller than needed for the new lavatory.
Lavatories without faucet holes require the installation of a
wall-mount faucet with a minimum 7" (17.8cm) spout length.
1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
Cut out the template where indicated for the countertop opening.
Cut along the inside of the cutting line.
Position the template on the countertop to ensure clearance
between the front and back countertop edges.
Trace around the template on the countertop with a pencil.
Kohler Co. 3 1018891-2-A