Tools And Materials; Before You Begin - Kohler K-2282 Installation Manual

Tools and Materials

Template
Pencil
(supplied)
Tape
Scissors
Measure
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

Observe all local plumbing and building codes.
CAUTION: Risk of personal injury or product damage. Handle
with care. Vitreous china can break or chip if the product is
handled carelessly.
Prior to installation, unpack the new lavatory and inspect it for
damage. Return the lavatory to its protective carton until you are
ready to install it.
Inspect the drain and supply tubing. Replace if necessary.
Do not substitute another sealant if one is supplied with this
lavatory.
Use the template supplied with the lavatory.
IMPORTANT! This lavatory is not designed or intended for
installation to a standard 22" (55.9cm) countertop with backsplash or
bullnose front edge. This lavatory requires a minimum 21-1/8"
(53.7cm) flat surface for installation.
You must cut the hole in the countertop before installing the
countertop.
1018891-2-A
Sealant
Drill
Plus:
1/2" (1.3cm) drill bit
Rags or Paper Toweling
Saber
Saw
2
Safety
Glasses
Kohler Co.