eSpace 7950 IP Phone
User Manual
----End
5.7 Phone Lock
If a phone is locked, press Unlock and enter the required password to unlock it.
5.8 Call Hold
During call hold, the two parties in the call cannot hear each other.
5.9 Call Transfer
During a call, you can transfer the call to a third party.
A call can be transferred in any of the following three modes:
Blind Transfer
Step 1 Press Transfer during a call.
The call hold is enabled.
Step 2 The blind transfer can be performed in either of the following ways:
----End
Issue 06 (2013-08-04)
Holding a call: During a call, press Hold to hold the call.
Resuming a call: During active call hold, press Resume to resume the call.
When multiple calls are connected on the phone, you can press the line button to hold or resume a call.
Blind transfer
A call is transferred to a third party directly.
Semi-attended transfer (for eSpace UC1.1)
A call is transferred to a third party after the phone of the third party rings.
Fully-attended transfer
A call is transferred to a third party after the third party answers the call.
Before enabling the call transfer service for an account, ensure that at least two lines have been
configured for the account.
Enter the number of a third party, press More to navigate to Done, and press Done.
Press the Up arrow or Down arrow button to select a contact, press Contact to select a
contact in my contacts, or press History to select a contact in call records, and press
Done.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Phone Usage
42