Troubleshooting - Uniden XS915 Quick Start Manual

TROUBLESHOOTING

TROUBLESHOOTING
!
The status light won't illuminate Make sure the AC adaptor is plugged into each base and wall outlet.
when the handset is placed on !
Make sure the handset is properly seated in the base.
the base.
!
Make sure the charging contacts on each handset and base are clean.
The audio sounds weak and/or ! Move the handset and/or base to a different location away from
scratchy. metal objects or appliances and try again.
!
Press
!
Make sure that you are not too far away from the base.
!
Can't make or receive calls. Check both ends of the telephone line cord are plugged in firmly.
! Make sure the AC adaptor is plugged into the base and wall outlet.
! Disconnect the AC adaptor for a few minutes, then reconnect it.
!
Make sure that you are not too far from the base.
!
Charge the handset.
!
The handset doesn't ring or The battery pack may be weak. Charge the battery for 20-25 hours.
receive a page. !
The handset may be too far way from the base unit.
! Place the base unit away from appliances or metal objects.
!
Caller ID does not display. The handset was picked up before the second ring.
!
The call was placed through a switchboard.
! Call your local telephone company to verify your Caller ID service is current.
If you still have a problem. Australia: www.uniden.com.au New Zealand: www.uniden.co.nz
Page 17
/channel while on a call to change the operating channel.