Advertisement
a7 ADHESIVE SHOES
Bit feet go in the shoes
The shoe adhesive
NOTE:
is for onetime use only.
MEET THE ACCESSORY
Shoes slip onto your Bit feet
and hold your circuit together.
On the bottom of your shoes
you'll find adhesive, which
is great for securing your
circuits to different surfaces.
HOW IT WORKS
First, snap together your
littleBits circuit. Then press
the feet of your Bits into the
holes of the shoes and place
it on your chosen surface.
Adhesive shoes can be
secured onto any surface –
paper, cardboard, plastic
– you name it! Just peel the
adhesive backing off, and
stick it on.
a10 MOTORMATE
Flat edge
MEET THE ACCESSORY
The motorMate makes
it easy to attach paper,
cardboard, LEGO
axles,
®
and lots of other materials
to the DC motor.
HOW IT WORKS
To mount, slide the motorMate
onto the shaft of the DC
motor by aligning the flat
edges. The motorMate has
two different sized slots: one
fits most standard craft sticks
and the other fits thicker
papers like cardstock. LEGO
axles fit right into the center.
17
Advertisement
