Advertisement
TROUBLESHOOTING
1
MAKE SURE YOUR POWER BIT
see a red LED illuminated on the board.
4
MAKE SURE YOUR BITS ARE ARRANGED IN THE
Remember that you always need a
PROPER ORDER.
power Bit & power supply at the beginning of each
circuit, and an output Bit at the end. If the last Bit in
your chain is an input, then it won't do anything to
affect your circuit.
2
You should
IS ON.
TRY SWAPPING IN A NEW 9 VOLT BATTERY.
TM
batteries can cause a circuit to act erratically. Bits
have different power demands. For example: a DC
motor may appear to not be working while a light
still shines brightly.
5
CHECK YOUR CONNECTIONS
snapped to each other? You can also try gently wiping
down the ends of the bitSnaps with a soft cloth (like
your sleeve). Sometimes dust gets in the way of a
strong connection. Try unsnapping, cleaning the
bitSnaps, and snapping it all back together again.
3
Low
ENSURE THE POWER CABLE IS SECURELY FASTENED
TO BOTH THE POWER BIT AND THE BATTERY.
TM
. Are all the Bits securely
STILL HAVING TROUBLE?
customer service team at support@littleBits.com.
IN-DEPTH TROUBLESHOOTING
AVAILABLE AT LITTLEBITS.COM/FAQ
OR ON THE LITTLEBITS INVENT APP.
Visit littleBits.com/faq or contact our
59
Advertisement
