Advertisement
Scan Magnification Correction (Sub-scan)
Magnification (enlargement/reduction) in the sub
scan (vertical) direction is done by adjusting the
speed of the scanner motor with SP2116 (Copier
Sub Scan Magnification Setting)
Adjustment is done relative to the default setting
of 0, which means 100%.
Slide 196
No additional notes
If you reduce the setting, this increases the speed
of the scanner motor and the sub-scan length of
the image is reduced when it is printed.
If you increase the setting, this reduces the speed
of the scanner motor and the sub-scan length of
the image is enlarged when it is printed.
196
MO-C1 Training
Advertisement
