Advertisement
Quick Links
Advertisement
Related Manuals for Kaon CG2200
Summary of Contents for Kaon CG2200
- Page 1 Cable Gateway Pro KAON CG2200 Quick Setup Guide...
-
Page 2: Before You Get Started
Before you get started Please wait for your confirmation from us that your Cable (HFC) broadband service is active. If at any point you’re asked for your modem’s MAC or Serial Number, you’ll find these printed on the sticker found on the base of your modem. - Page 3 Get to know your modem Light State Meaning Power Modem is turned on Modem is turned off or has no power supply Modem is receiving data from the Cable network POWER Blinking Modem is searching for downstream channel or a firmware upgrade is in progress Modem has no power or it cannot connect to the Cable network Modem is sending data via the Cable network Blinking...
- Page 4 Set up your Cable Gateway Pro 1. Connect the Coax cable from your Cable wall outlet to the CABLE IN connector on the back of your modem. 2. To connect a computer via Ethernet, use an Ethernet cable to connect IMPORTANT: one of the LAN ports on the back of your modem to your computer’s Secure Coax Cable tightly...
- Page 5 Phone Cable TEL1 TEL2 LAN1 Ethernet Cable LAN2 Computer Phone Handset LAN3 LAN4 RESET Cable Socket Power Socket Coax Cable CABLE IN 12V IN Power Cable...
-
Page 6: Wifi (Wireless) Setup
WiFi (Wireless) Setup Your modem’s WiFi has been pre-configured. You’ll find the WiFi network name (SSID) and password printed on the barcode sticker on the base of your modem. 1. Make sure that WiFi is enabled on your computer, tablet, smartphone or other WiFi device. - Page 7 WiFi Customisation To change the default name and password for the WiFi network(s), follow the steps below. 1. On a computer that’s connected to your modem via Ethernet or WiFi, open your web browser and go to http:/ /192.168.0.1. Log in with the default username “admin”...
-
Page 8: Router Security Settings
Router Security Settings If desired, you can change your modem’s What if I forget my details? administrative username and password. This can If you ever forget your custom login details, you be handy if you have tenants or meddling teens can factory reset the modem to return it to the and you don’t want them to change your modem default settings. - Page 9 Lights to look out for If both the US and DS lights are BLINKING and the Online light is ON, your modem is upgrading its firmware. You don’t need to do anything; simply wait for the upgrade to complete. POWER If both the US and DS lights are BLINKING but the Online light is OFF, your Cable service may not be fully activated on our end.
-
Page 10: Warranty Info
Warranty Info How to claim under the warranty and your rights equipment has already been paid for, you will not be entitled to a refund. 1.1 In order to claim under the warranty, you should contact us to advise that you wish to claim under the warranty and 1.4 The warranty does not apply to faults caused by any of the answer any questions we have. - Page 11 Warranty Info 1.7 Goods presented for repair may be replaced by refurbished Warranty Period goods of the same type rather than being repaired. Purchase: 24 Months Refurbished parts may be used to repair the goods. If your 2.1 You must notify us of the fault with your equipment within equipment is replaced with refurbished equipment, the the applicable Warranty Period (beginning from the date you warranty applies in relation to that refurbished equipment...
- Page 12 Having trouble? If you find you can’t get online after following these instructions, please give our friendly support team a call and we’ll be happy to help. iiNet Support Westnet Support Available 24/7 Available 24/7 13 22 58 1300 786 068 support@iinet.net.au support@westnet.com.au ACN 068 628 937...
Need help?
Do you have a question about the CG2200 and is the answer not in the manual?
Questions and answers
Does the model no CG2200 have a built in Firewall