Kaon CG2200 Quick Installation Manual

Kaon CG2200 Quick Installation Manual

Hide thumbs Also See for CG2200:

Advertisement

Quick Installation Guide

The CG2200 is a high-performance cable gateway which combines D3.0
cable modem, router, voice and wireless AP in a single device.
The CG2200 provides :
Compliant with DOCSIS 3.0 and US DOCSIS 3.0 standards along with
PacketCable specification to deliver high-end performance and reliability
Dual-band concurrent Wireless Access Point compatible with 802.11b/g/n
and 802.11ac
Four 10/100/1000BASE-T Ethernet ports to provide wired connectivity
Two line embedded digital voice adapter for wired telephony service
For easy checking, DOCSIS-compliant LED labeling and indicating provides
a user and technician an intuitive method to check operational status and
act as a troubleshooting tool
1. Front Panel
1
2
3
4
5
6
7
8
9
Off
The modem is powered off.
1
POWER
On
The modem is powered on.
Off
The initialization is not started, or has failed.
Flashing The modem is scanning for downstream channel.
DS
2
On
The modem isdownstream locked.
Off
The initialization is not started, or has failed.
US
Flashing The modem is upstream ranging.
3
On
The modem is upstream locked.
Off
Internet service isnot available.
4
ONLINE
Flashing The modem isinitializing.
On
Internet service isavailable.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CG2200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kaon CG2200

  • Page 1: Quick Installation Guide

    1. Front Panel Quick Installation Guide The CG2200 is a high-performance cable gateway which combines D3.0 cable modem, router, voice and wireless AP in a single device. The modem is powered off. POWER The modem is powered on. The CG2200 provides : The initialization is not started, or has failed.
  • Page 2 3. Rear Panel 2.4G WiFi Interface disabled. Flashing 2.4G WiFi is sending or receiving data. 2.4G 2.4G WiFi Interface enabled. 5G WiFi Interface disabled. Flashing 5G WiFi is sending or receiving data. 5G WiFi Interface enabled. The LAN port is not connected. ETH 1~4 Flashing The LAN port is sending or receiving data.
  • Page 3 1 meter or more away from the telephone, as this may cause frequency interference 6. PackageContent Quick Guide CG2200 EthernetCable PowerAdaptor QuickGuide (CAT5/RJ45) Adaptador ca/cc Entrada: 100-240 Vca 50/60 Hz 0.8ª Salida: 12 Vcc 2.5A...
  • Page 4: Specification

    RAM : 256MB DDR3 802.11 a/b/g/n/ac MU-MIMO Wi-Fi 2.4GHz 3x3 + 5GHz 3x3 Dual Band Concurrent Internal Antennas Mesh KAON Smart Mesh 12 xLED Front (PWR, DS, US, Online, 2.4G, 5G, ETH1~4, TEL 1~2) WPS Button 1 x Resetpin-hole 4 x GbE LAN Ports...
  • Page 5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 6: Network Configuration

    How to access Kaon Web Page Network Configuration Access the web server, and check the equipment status and progress Enable to set the IP address available on the device, and this IP is user settings. used to access the web server. The IP address must not be forgotten.
  • Page 7: Dhcp Server Configuration

    Network Configuration DHCP Server Configuration If the DHCP server is activated, the devices connected to the equip- If ISP uses DHCP, select “DHCP” for WAN Connection Type. If ISP uses static IP addressing, select “Static IP” for WAN Con- ment can get assigned automatically a private IP address. nection Type, and enter the information(GW, Subnet Mask, DNS) provided byISP.
  • Page 8: Wireless Configuration

    Wireless Configuration Wireless Configuration (Radio) (Primary Network) You set SSID and authentication method for connection to WiFi Set whether wireless, and the default information. The default set- network. tingsrecommended. Select “Radio” on wirelessinterface. Set SSID on connecting WiFi network. If you select “Enabled” on wireless, Wireless isactivated. Select the applicable encryption method for the access authentication.
  • Page 9 Spectrum Analyzer (DS/US) Status (Security) Spectrum Analyzer enables the technicians to configure You set the account information to enable to access to the an interactive GUI to understand about characteristics on equipment. the CM, it works normally as they utilize a regular spectrum analyzer.
  • Page 10 Wireless Insight Wireless Insight is able to support that technician can configure an interactive GUI to do following cases. Type http://192.168.100.1:8080 on your web browser address bar. Push the WiFi Insight on left side of web browser In addition, Home Topology tool will help to see the current network connection via the AP.
  • Page 11: Troubleshooting

    Problem: I Forgot the CG2200’s IP Address Problem: None of the LEDs Turn On The CG2200 is not receiving power, or there is a fault with the device. The CG2200’s default LAN IP address is 192.168.0.1. Ensure that you are using the correct power adaptor. (You should You can locate the CG2200’s GUI by entering the LAN domain suffix...
  • Page 12 CG2200 back to Ensure that the CG2200 and the wireless client are set to use its factory defaults by pressing reset button for at least 3 seconds.

Table of Contents

Save PDF