Arcan BLACKLINE ALJ3TB Manual

Arcan BLACKLINE ALJ3TB Manual

3 ton aluminum service jack

Advertisement

WARNING INFORMATION
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels
are lost or not legible, contact
safety instructions shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his
designee, making sure that the operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

WARNING
The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical means, but only
by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the use
and operation of equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its proper
use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading,
off–centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

WARNING
Read, study, understand and follow all instructions before operating this device.
Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or
unstable due to loose or missing components. Make corrections before using.
Lift only on areas of the vehicle as specified by the vehicle manufacturer.
User and bystander must wear eye protection that meets ANSI Z87.1 and OSHA standards.
Do not use jack beyond its rated capacity. Do not shock load.
THIS IS A LIFTING DEVICE.
before working on the vehicle.
Use only on a hard level surface free from obstructions so the jack is free to reposition itself during lifting and lowering
Center load on saddle. Be sure setup is stable before working on vehicle.
Do not move or dolly the vehicle while on the jack.
Do not use any materials that may serve as risers, spacers or extenders between the stock lifting saddle and the load.
Do not use any adaptors that replace the stock lifting saddle unless approved or supplied by the jack manufacturer.
Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the
manufacturer's authorized representative.
Always lower the jack slowly and carefully.
Failure to heed these warnings may result in fatal personal injury and/or property damage.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

WARNING
Failure to read this manual completely and thoroughly, understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCE INSTRUCTIONS and not comply with them, and neglecting the METHODS TO AVOID HAZARDOUS SITUATIONS could
cause accidents resulting in serious or fatal personal injury and/or property damage.
ALJ3TB
Arcan Customer Service
for a free replacement. If the operator is not fluent in English, the product and
Immediately after lifting, support the vehicle with jack stands capable of sustaining the load
For Technical Questions, Call: 1-800-879-7316
WARNING: Indicates a hazardous situation
WARNING
which, if not avoided, could result in death
or serious injury.
1
Model ALJ3TB
3 Ton Aluminum Service Jack
REV: 12/03/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLACKLINE ALJ3TB and is the answer not in the manual?

Questions and answers

Summary of Contents for Arcan BLACKLINE ALJ3TB

  • Page 1 If the manual or product labels are lost or not legible, contact Arcan Customer Service for a free replacement. If the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner or his...
  • Page 2 INSPECTION Visual inspection should be made before each use of the jack, checking for leaking hydraulic fluid and damaged, loose or missing parts. Any jack which appears to be damaged in any way, is found to be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE until necessary repairs are made.
  • Page 3 SETUP (CONT.) c) Close the release valve by turning the (62) handle clockwise until it stops. Pump the jack against a load of at least 500 pounds (225 Kgs). After the load is raised to maximum height, slightly turn the (62) handle in a counterclockwise direction so the load is very slowly lowered, while simultaneously and quickly pumping the handle 5 or 6 full incremental pump strokes.
  • Page 4 HYDRAULIC MAINTENANCE GUIDE IMPORTANT: Service jacks are designed for lifting purposes only; always support raised load with jack stands. REGULAR MAINTENANCE MONTHLY or as necessary (depending on usage) #1 Lubricate all linkages and pivot points. (Use white lithium spray grease only.) #2 Remove handle;...
  • Page 5 REPLACEMENT PARTS ITEM NO MODEL NO DESCRIPTION ITEM NO MODEL NO DESCRIPTION RS6603ASJ01R Rear Caster Saddle Base Rear Caster Bracket Gasket Of Saddle RS6603ASJ03 Locking Nut M12 RS6603ASJ36BK Saddle Washer 10 Saddle Bolt Tooth Washer 10 RSALJ3T38 Saddle Pad Bolt M10x25 Tooth Washer 12 Saddle Base Axle Bolt M12x25...
  • Page 6 This product carries a ONE-YEAR warranty. During this warranty period, Arcan® Professional Tools will repair or replace at our option any part or unit which proves to be defective in material or workmanship.

Table of Contents