Using The Truecpr Device; Performing Cpr - Physio Control TrueCPR 80596-000001 Instructions For Use Manual

Coaching device
Table of Contents

Advertisement

Using the TrueCPR Device

1
2
Item
Description
Battery Readiness Indicator: Flashing LED on back pad handle indicates
1
battery capacity is sufficient for at least 25 minutes of operation.
Note: LED flashes approximately once every 4 seconds.
USB Port Cover: Provides access to USB port. Use a coin or similar tool
2
to open.
Battery Compartment: Holds two nonrechargeable Duracell
3
batteries. Use a coin or similar tool to open.
Using the TrueCPR Device

Performing CPR

To use the TrueCPR device:
1 Confirm patient is in cardiac arrest.
2 Remove the device from the carrying bag.
3 Separate the chest pad and back pad.
4 Press the
(POWER)
IMPORTANT! Do not press on the chest pad until calibration is complete and feedback screen
appears (approximately 3 seconds).
4
Back Pad
button to turn the device on. The calibration screen appears.
3
®
DL123
TrueCPR Device Instructions for Use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TrueCPR 80596-000001 and is the answer not in the manual?

Related Products for Physio Control TrueCPR 80596-000001

Table of Contents