Using One Touch Voice Mail Access - Uniden TRU 8860 Series Owner's Manual

Using One Touch Voice Mail Access

note
You must subscribe to
voice mail service from
your telephone company
in order to use this
feature. The voice mail
service company will
provide you with the
access number.
[ 3 6 ] B A S I C S
If you subscribe to voice mail service, you can use your phone to access your voice
mailbox. The new message LED flashes whenever you have messages waiting in your
voice mailbox.
Just program the handset with your access number, and you can get your messages
at the touch of a button on the handset. (The voice mail service provider will
supply you with the access number. This number may be simply a phone number.
Refer to the provider's literature.)
To program or delete your Voice Mail Access Number, See page 19.
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your mailbox
with the touch of a button. When you have messages, simply press the
If you have not entered the access number or it has been deleted, when you press
the soft key,
No Num ber Sto red To st ore nu mbe r pr ess [M ENU ]
will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
The LED flashes when you have new messages in the voice mail service. If the LED
remains on after you've retrieved your messages, you may need to reset the
indicators. With the phone is in standby mode, press and hold find handset on the
base unil the paging sound stops (about 5 seconds).
soft key.
appears and you
w w w . u n i d e n . c o m