Installing The Beltclip; Using Your Handset - Uniden TCX 805 Owner's Manual

Accessory handset

Hide thumbs Also See for TCX 805:

Table of Contents

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the

handset. Press down until it clicks.

To remove the beltclip

Pull either side of the beltclip to release the tabs from the

holes.

Now that your new handset is registered, it can perform all the same

functions as the handsets originally included with your phone. With

your new handset, you can

• Transfer calls between handsets

• Use two handsets as an intercom

• Use two handsets as 2-way radios in DirectLink mode

• Use two handsets as a baby/room monitor

• Hold conference calls

See the owner's manual that came with your main base unit for

complete instructions on operating your new expanded digital phone.

You can also download owner's manuals from our website at

www.uniden.com.

• Two-line operation is supported only when the handset

is registered to a two-line base.

• The Elite and CLX series bases contain advanced

features that may not be supported by this handset.

Please visit our website at www.uniden.com for feature

comparisons.

–

Table of Contents