Advertisement
TECH 21, THE COMPANY
Tech 21 was formed by a guitarist possessing the unusual combination
of a trained ear and electronics expertise. In 1989, B.Andrew Barta
made his invention commercially available to players and studios around
the world. His highly-acclaimed SansAmp™ pioneered Tube Amplifier
Emulation in professional applications for recording direct and per-
forming live, and created an entirely new category of signal processing.
There have since been many entries into this niche, yet SansAmp contin-
ues to maintain its reputation as the industry standard.
With a full line of SansAmp models,Tech 21 also offers effect pedals
and MIDI products, as well as "traditional" style amplifiers for guitar
and bass. Each product is thoughtfully and respectfully designed by B.
Andrew Barta himself with the player in mind. Our goal is to provide
flexible, versatile tools to cultivate, control, refine and redefine your
own individual sound.Tech 21 takes great pride in delivering consistent
quality sound, studio to studio, club to club, arena to arena.
PRODUCT OVERVIEW
The dUg Pinnick Signature DP-3X pedal is a super-compact adaptation
of his Tech 21 Ultra Bass 1000 Signature head. Both recreate the sound
dUg originally developed way back in the '80s, merging high-end distor-
tion with low-end bass. Prior to his signature head, this involved run-
ning a guitar amp and a bass amp together, along with rack full of effects.
Wanting to further streamline his gear for occasions when his full Tech
21 rig simply isn't practical, dUg collaborated on the all-analog DP-3X
pedal. Personally beta-testing the DP-3X on a European tour, dUg en-
countered a different backline in each and every venue. But no matter
which amp was on stage, dUg was able to nail his immense tone each
and every night. According to dUg,"We had a little car, guitars and
drumsticks.That's it.There was not a club or a bass amp that I played
through that [the DP-3X] didn't give me the tone that I wanted."
Having two modes, the DP-3X has the flexibility to provide traditional
bass amp sounds in addition to achieving dUg's unique tone. dUg said,
"It is designed for your fingers, or your pick, and for you to forge your
own tone.With this thing, you can manipulate it any way you want to
and get a sound that is yours."
APPLICATIONS
WITH A BASS AMP RIG:
-As a Pre-Amp: Run the 1/4" Output of the DP-3X directly into
the power amp input, a.k.a."effects return" (if applicable), of an amp.
This will bypass the tone-coloring pre-amp section of the amp rig.
-As a Stomp Box: Run the 1/4" Output into the front input of an
amp. For best results, keep the DP-3X Volume close to unity gain so
you have the same volume coming from your speaker/monitor whether
the pedal is active or in bypass. This ensures the next device in the sig-
nal chain won't get slammed by a much hotter signal than what would
normally come from the instrument. Similarly, you wouldn't want a
drop in volume, either, which would force the next device to struggle
for enough signal.
TO DRIVE A POWER AMP: Run the 1/4" Output or the XLR
Output to the corresponding input of a power amp, and adjust your
stage volume with the Volume control of the DP-3X.
TO RECORD DIRECT: Plug the XLR or 1/4" Output directly into
the input of a mixer/recorder.Work with the input trim control on the
mixer/recorder and be sure not to overload its input. Bear in mind full-
range systems yield a wide frequency response.Therefore, we suggest
you start with the EQ levels at 12 o'clock and then increase/decrease
to taste.
1
THE INS AND OUTS
1/4" INPUT: 1megOhm instrument level. For normal operation, sig-
nal level to Input should be close to that of a standard guitar (approxi-
mately -10dBm / 250mV).
1/4" UNIVERSAL OUTPUT: Unbalanced low Z output. This
output can be connected to High Z amplifiers (or effects) as well as Low
Z mixer and computer inputs.Output level is unity gain when pedal is in bypass
mode. It also drives long cables without loss of signal integrity, even in bypass.
BALANCED XLR OUTPUT & GROUND
CONNECT SWITCH: Balanced low Z output.When the
Ground Connect switch is engaged, the ground connects.
Disengaged, the ground of your stage system and other inter-
connected gear is lifted (isolated) from the ground of the
mixing console.
UNIVERSAL POWER SUPPLY
The dUg DP-3X is shipped with a power supply that is set up with a
U.S. prong assembly. To change the prong assembly to one of the in-
cluded European, UK or Australia/New Zealand styles, be sure the
power supply is unplugged and follow these instructions:
Press the PUSH switch to release the
prong assembly. Slide the assembly up
(about halfway) to align the side tabs of
the prong assembly with the slots of
the power supply housing.Then pull up
to remove the assembly. Choose the
new prong assembly, align the side tabs
with the slot of the housing and slide
down until it clicks into position.
NOTE: You cannot slide the
prong assembly all the way out
or in.
2
Advertisement
