Advertisement
Table of Contents
- 1 Power Requirements
- 2 Product Overview
- 3 Applications
- 4 The ins and Outs
- 5 Good to Know before You Start
- 6 Guide to Functions and Controls
- 7 COMP Section
- 8 SANSAMP Section
- 9 BOOST Section
- 10 OCTA Section
- 11 CHR Section
- 12 Other Goodies
- 13 Signal Flow of the OCTA Section
- 14 Noteworthy Notes
- 15 OCTA Reference
- 16 Sample Settings
- Download this manual
POWER REQUIREMENTS
Utilizes included 9V DC power supply, 200mA, center negative.
Model #DC4-US
North America:
Model #DC4-D
International:
Note: International power supplies are auto-switching with appropri-
ate corresponding plugs for each host country.
For replacements, contact your local dealer/distributor, or Tech 21.
Maximum power consumption: approx 100mA.
WARNINGS:
* Attempting to repair unit is not recommended and may void warranty.
* Missing or altered serial numbers automatically void warranty. For
your own protection: be sure serial number labels on the unit's back
plate and exterior box are intact, and return your warranty
registration card or register online.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules.These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARRANTY:
ONE YEAR LIMITED. PROOF OF PURCHASE REQUIRED.
Manufacturer warrants unit to be free from defects in materials and
workmanship for one (1) year from date of purchase to the original
purchaser and is not transferable.This warranty does not include dam-
age resulting from accident, misuse, abuse, alteration, or incorrect cur-
rent or voltage. If unit becomes defective within warranty period, Tech
21 will repair or replace it free of charge. After expiration,Tech 21 will
repair defective unit for a fee.
REPAIRS:
ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for
Return Authorization Number. Manufacturer will not accept
packages without prior authorization, pre-paid freight (UPS preferred)
and proper insurance.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21 weekdays 10:00 AM to 5:00 PM, EST: 973-777-6996.
Hand-built in the U.S.A. using high-quality components
sourced domestically and around the globe.
T: 973-777-6996 • F: 973-777-9899
E: info@tech21nyc.com • www.tech21nyc.com
©2016 Tech 21 USA, Inc.
Advertisement
Table of Contents
Related Manuals for Tech 21 Bass Fly Rig
Summary of Contents for Tech 21 Bass Fly Rig
- Page 1 If unit becomes defective within warranty period, Tech 21 will repair or replace it free of charge. After expiration,Tech 21 will repair defective unit for a fee.
- Page 2 It also drives long cables without loss of signal integrity, even PRODUCT OVERVIEW in bypass. The Bass Fly Rig is more than a pedalboard. In a single pedal. And no board. Less than 13 inches long and weighing just over 20 oz., this sleek, BALANCED XLR OUTPUT & GROUND CONNECT compact unit embodies an entire rig.
- Page 3 (in order of signal flow) SANSAMP Section COMP Section The all-analog SansAmp technology enables the Bass Fly Rig to run di- Comp utilizes old school, all-analog, FET-based technology from the ‘50s and ‘60s, which is inherently warmer, more transparent and more musical rectly into mixers of recording desks and PA systems, as well as augment than other methods of compression.
- Page 4 CHR Section OCTA Section CHORUS: This single chorus control injects a detuned voice into the OCTAFILTER: This reinvented palette of expression provides a crazy amount of possibilities, from Minimoog®-style synth to funky main analog signal path to create the effect of 2 or more instruments in town.The controls interact so that you can get dynamically-filtered unison.
- Page 5 Be aware single coil pickups are more likely to generate noise. 6) Placement notes: The Bass Fly Rig can be treated as an ampli- fier or preamp when it comes to setting up your signal chain: Place the following effects BEFORE the Bass Fly Rig: Phaser/Vibe, Overdrive,Wah.