Technical Data; Installation - Kruger Vigo KCG30 User & Installation Manual

TECHNICAL DATA

Burner
Type
Auxiliary Burner
Semi-Rapid Burner
Rapid Burner
Triple Ring Burner
Gas intake connection:
Electricity Supply:

INSTALLATION

This appliance must only be installed and used in rooms with permanent
!
ventilation to local standards.
Installation of the appliance and its connection to the electrical mains
must only be carried out by QUALIFIED PROFESSIONALS.
Before installation, it is important to check that the appliance is
DISCONNECTED from the electrical mains. KRUGER™ declines all
responsibility for any damages arising from installation in breach of the
regulations in force or from failure to comply with the accident prevention
regulations.
Installation Premises
For proper operation of a gas appliance, the air necessary for the combustion
of the gas must be able to flow into the room naturally.
The air must flow into the room directly through openings in the outside
walls. These openings must have an unobstructed cross-section not less
than 1.18CFM or 2m
appliance nameplate).
Max Output
BTU/h Nozzle (mm)
5000
6800
8500
16000 5 x Ø 0.99
G1/2"
110-120v ~ 50/60Hz
/h for each kw of power (see total power in kw on the
3
Natural Gas
CFM
1 x 1.10 0.06
1 x 1.29 0.11
1 x 1.45 0.17
0.25
11
LPG / Propane
Nozzle (mm)
1 x 0.70
1 x 0.80
1 x 0.91
5 x Ø 0.56
...continued on next page
Cons g/h
73
124
182
327