Entering Your Area Code - Uniden EXI2926 Owner's Manual

Entering Your Area Code

note
If you enter a 3-digit area code number in the "
the Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When
reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside
your local area code, you will see a full 10-digit number.
If your calling area
requires 10-digit
dialing, do not
1) When the phone is in the standby mode, press and hold call id/hold
program this option.
until the Caller ID setting screen appears.
2) Press Lup/int'com or dnM/conf to select "
3) Press sel/vol.
4) Press Lup/int'com or dnM/conf to select "
5) Press sel/vol.
6) Use the dial buttons (0 to 9 ) to enter the 3-digit area code.
7) Press sel/vol. A tone sounds and the displayed area code is entered.
8) Press call id/hold to complete the setting. Or return the handset to the base
unit. The handset returns to standby mode.
When the area code has already been stored in memory, the stored area code will be displayed.
note
To change it, use the delete/flash and number keypad to enter the new area code. Then press
sel/vol. To complete the setting, press call id/hold or return the handset to the base unit.
[ 12 ] G E T T I N G S T A R T E D
" option, your local area code does not appear in
" or " ".
".