Uniden EXI2960 Owner's Manual page 27

Calling a party from the Caller ID list
You can place a call from the Caller ID list. The EXI2960/EXI2965 stores up to 30 messages.
1) Press call id. Select the phone number that you want to dial by pressing
2) Press talk. The displayed phone number dials automatically.
Long Distance calls and Area Code Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed (in step 1) will place the prefix " " in
the display to set up for a long distance call. Pressing 3 will set or cancel an area code setting.
Dial edit
You can temporarily edit the Caller ID number that is displayed by pressing select . A cursor appears in the
display. Press to move the cursor left, make your changes and then press . This will not change the number
in the Caller ID list memory.
If you want to save this new number, store the information in memory. (See page 17.)
or .
• You cannot make
a call from the
Caller ID list if
your EXI2960/
EXI2965 is
connected to
private branch
exchange (PBX).
• When a long
distance call has
been set, ¨ ¨
appears in the
display.