Frigidaire FPRU19F8WF Use & Care Manual page 16

16
CONTROLS AND SETTINGS
Alarms
DOOR OPEN
1
This alert indicates the door has been open for 5 minutes or more. The DOOR
OPEN LED will illuminate and the audible alert will sound until the door is closed.
The audible alert can be turned off by pressing the DOOR OPEN key or by clos-
ing the door. If the door is ajar for 5 minutes, the interior light will turn off.
POWER OUTAGE
2
The POWER OUTAGE indicator light informs you there has been a power inter-
ruption which could have led to the internal temperature incresing beyond the
safe temperature range. After you check your food, reset the alarm by pressing
POWER OUTAGE.
HIGH TEMP
3
If the temperature increases above a safe temperature range, the red HIGH
TEMP LED light will illuminate and the alarm will sound. Reset the alarm by
pressing HIGH TEMP.
Controls
The lock button can be used to lock the control panel. Press and hold
4
onds to enable. While in the locked state, no changes can be made until unlocked.
Press and hold
The settings icon illuminates upon opening the appliance door. Press the set-
5
tings icon to reveal other function icons. After 10 seconds of non use of icons or
door closure, all icons will fade except the settings icon.
Adjusting Temp
6
To adjust the temperature setting, press + to raise the temperature and - to
lower the temperature on the appliance control. Allow several hours for the tem-
perature to stabilize between adjustments.
TEMP °F/°C
7
Short press to toggle between Fahrenheit (°F) and Celsius (°C).
CHILL BOOST
8
Turning on CHILL BOOST will cool the appliance down to a target temperature
and will remain active for up to 24 hours before automatically deactivating or
being manually exited. To turn the function on/off, press CHILL BOOST. When
you turn off CHILL BOOST, it will automatically reset the refrigerator back to
the previous temperature setting.
AIR FILTER
9
The AIR FILTER replacement alert will illuminate when it is time to replace the
air filter. See the FILTER REPLACEMENT section for instructions on how to
replace the air filter. After changing the air filter, reset the AIR FILTER alert by
pressing and holding AIR FILTER.
WATER FILTER
10
The WATER FILTER replacement alert will illuminate when it is time to replace
the water filter. See the FILTER REPLACEMENT section for instructions on how
to replace the water filter. After changing the water filter, reset the WATER
FILTER alert by pressing and holding WATER FILTER.
WATER DISP
11
The illuminated WATER DISP LED means the internal water dispenser is ON.
Open the internal water dispenser by pushing the push-push nozzle. Press the
water dispenser paddle inside the cabinet to dispense water. Turn the dispenser
off by pressing and holding WATER DISP for 3 seconds. When the water dis-
penser is off, you cannot dispense water. You will hear a beep if you try to press
the paddle without WATER DISP being turned on. Press and hold WATER DISP
to turn it on.
for 3 seconds to disable.
for 3 sec-