Samsung SWA-8500S User Manual page 10

7. If the SWA-8500S does not connect, take the necessary steps
according to the LED Indicator's status
LINK (Blue)
STANDBY (Red)
Others
Compatible Models
HW-M360
HW-M4500
HW-M550
• The model list is subject to change without further notice.
LED status
Connected with
On
the Soundbar
Connection
Blinking
standby status
On Connection failure
- Errors
HW-M369
HW-M4501
HW-M560
ENG - 10
Action
-
Check if the Soundbar is turned on
Repeat steps 3 through 6.
Check if the Soundbar is turned on
1. Press the ID SET button on the back
of the Wireless Receiver Module with
a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
ID SET
2. Repeat steps 3 through 6.
Contact a Samsung Service Centre.
HW-M450
HW-M4510
5 Sec
ID SET
HW-M460
HW-M4511