Cisco Catalyst IW6300 Heavy Duty Series Installing Manual page 17

Installing the Access Point
Use Case Antennas
Omnidirectional 1x 2.4 GHz 13 dBi
access on 5 GHz, Directional Antenna
backhaul on 2.4 AIR-ANT2413P2M-N=
GHz and 2x Dual-Band
Omni-Directional
Antennas
AIR-ANT2547V-N,
AIR-ANT2547VG-N,
AIR-ANT2547V-N-HZ,
or AIR-ANT2568VG-N
or 2x 5 GHz 5 dBi
Omnidirectional
Antennas
AIR-ANT5150VG-N or
AIR-ANT5150HG-N or
2x 5 GHz 8 dBi
Omnidirectional
Antennas
AIR-ANT5180V-N
Directional access 1x 2.4-GHz/5-GHz 8-dBi
and/or backhaul Directional Antenna
with both radios; AIR-ANT2588P3M-N=
both radios
covering the same
direction
1x Four-Port Dual-Band
Polarization-Diverse
Antenna
AIR-ANT2513P4M-N=
Coaxial Cables Lightning
Arrestors and/or
Adapters
2x N(m) – N(m) cables: 2x N(m)-N(f)
Lightning Arrestor
CAB-L400-5-N-N
CGR-LA-NM-NF
CAB-L400-5-N-NS
and
CAB-L400-20-N-N
2x N(f)-N(f)
CAB-L600-30-N-N
adapter
or AIR-ACC370-NF-NF
AIR-CAB025HZ-N
2x N(m) – N(m) cables: 2x N(m)-N(f)
Lightning Arrestor
CAB-L400-5-N-N
CGR-LA-NM-NF
CAB-L400-5-N-NS
CAB-L400-20-N-N
CAB-L600-30-N-N
or
AIR-CAB025HZ-N
4x N(m) – N(m) cables: 4x N(m)-N(f)
Lightning Arrestor
CAB-L400-5-N-N
CGR-LA-NM-NF
CAB-L400-5-N-NS
CAB-L400-20-N-N
CAB-L600-30-N-N
or
AIR-CAB025HZ-N
Antenna Selection Examples
Installation Antenna
Mode
Configuration
Connect the two 5 GHz Single band
omnidirectional antennas
directly to ports C and D.
Mount the 2.4 GHz
directional antenna with
the included hardware
and connect it to ports A
and B via the adapters,
coaxial cables, and
lightning arrestors (if
required).
Connect the coax cables Dual band
from Ports A and B to the
two outer ports of the
antenna. Terminate the
unused middle port of the
antenna and Ports C and
D of the IW-6300 with a
weatherproof cap. Use
lightning arrestors if
required.
Connect all four ports of Single band
the
AIR-ANT2513P4M-N to
all four ports of the
IW-6300. Any port of the
IW-6300 can connect to
any port of the
AIR-ANT2513P4M-N.
Use lightning arrestors if
required.
Installing the Access Point
17