Advertisement
Quick Links
KESWICK FREESTANDING FAUCET INSTALLATION
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the
plumbing, floor, walls, tub, or for personal injury during
installation.
Observe all local plumbing and building codes.
Unpack and inspect the faucet for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
GETTING STARTED
Ensure that you have gathered all the required
materials that are needed for the installation.
For these instructions, it is assumed that the floor has
been finished and the water supply has been
prepared.
TOOLS AND MATERIALS:
Plumbers
Thread
Tape*
Sealant*
Adjustable
Level
Wrench*
Wood Shims
Drill
Keswick Freestanding Faucet Installation Instructions
SKU(s): 923164
Masking Tape
Hex Wrench
Pencil or
Marker
*not included
1
Advertisement
Related Manuals for Signature Hardware Keswick 923164
Summary of Contents for Signature Hardware Keswick 923164
- Page 1 SKU(s): 923164 KESWICK FREESTANDING FAUCET INSTALLATION TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor, walls, tub, or for personal injury during Plumbers Thread Masking Tape...
- Page 2 KESWICK FREESTANDING FAUCET INSTALLATION Installation 1. Connect the provided braided water lines to the 3. Slide the decorative baseplate onto the faucet body, supply posts on the faucet’s spout. Apply thread as shown. sealant or plumber’s tape to the threads before tightening.
- Page 3 KESWICK FREESTANDING FAUCET INSTALLATION 5. Drill pilot holes into the floor at the marked mounting 7. Connect the braided water lines to the main water hole locations. The pilot holes should measure approxi- supply at the floor. Ensure that you are connecting the mately 1”...
- Page 4 KESWICK FREESTANDING FAUCET INSTALLATION 9. Secure the faucet to the floor using the metal 11. Once installation is complete, turn on the main washers, locking washers, and nuts that were removed water supply. Remove the aerator from the spout and in step 6.
Need help?
Do you have a question about the Keswick 923164 and is the answer not in the manual?
Questions and answers