Advertisement
Turning on AC Manager 5
Turn on AC Manager 5 to set the network environment of AC Manager 5.
When the power switch is turned on, AC Manager 5 booting screen is displayed on the LCD as
shown at the following figure, and when booting is completed, the initial AC Manager 5 screen is
displayed.
Wait for booting···
NOTE
!
Software version
The software version of the current AC Manager 5 is displayed
at the initial AC Manager 5 screen. Also,
the software version may be different according to the manu-
facturing date of AC Manager 5.
Entering into the environment setup mode
Press [SET] button of AC Manager 5 to enter into the environment setup mode of AC Manager 5.
When the [SET] button is pressed for the first time, the menu to set the IP address is displayed
as shown below.
Press up/down (▲, ▼) button to place the arrow on the desired function.
• When you select [Network Info] and press [SET] button, it enters the No. 1 menu in the follow-
ing figure. In [Network Info] menu, input the network information such as IP address of AC
Manager 5.
• When you select [Function] and press [SET] button, it enters the No. 2 menu in the following
figure. In [Function] menu, AC Manager 5 software service function is supported.
AC MANAGER 5
SW ver. 1.0.0
IP
192.168.001.100
GW 192.168.001.001
CAUTION
!
• [Function] menu is used by the system air conditioner service technician, so user shall
never use this function.
If this function is incorrectly used, it may cause disorder of the AC Manager 5.
> Network Info
Function
[
S
E
] T
> Network Info
Function
[
]
INSTALLING AC MANAGER 5
AC MANAGER 5
SW ver. 1.0.0
IP
192.168.001.100
GW 192.168.001.001
AC MANAGER 5
SW ver. 1.0.0
IP
192.168.001.100
GW 192.168.001.001
1
[ Network Info ]
IP
000.000.000.000
GW 000.000.000.000
MS 000.000.000.000
[
S
E
] T
MC 000000:00:00:00
DHCP NO
2
[ Function ]
S/W update
[
]
DB back up
DB recover
11
Advertisement
