Erasing A Stored Number - Uniden DX8200 Operating Manual

PROGRAMMING YOUR DX8200
5. Press and enter a number (
memory location.
6. You will hear a confirmation beep and the talk/batt low LED goes out.
Write the stored number and its memory location number on one of the
enclosed stickers.

ERASING A STORED NUMBER

You can erase stored numbers from the Base Unit and the Handset memory.
Erasing Base Unit Memory Numbers
1. Press twice on the Base Unit.
2. Enter the memory location number (
You will hear a long beep confirming the number has been erased.
Erasing Handset Memory Numbers
1. On the Handset press
2. Enter the memory location number (
You will hear a long beep confirming the number has been erased.
~ ) from the Handset for the
~ ) you want to clear.
twice.
~ ) you want to clear.
39