Connectivity; Cellular Data Connection; Wireless Network Connection; Connecting To A Wireless Network - Mio F740s Series User Manual

3. Connectivity

Cellular Data Connection

Note: This feature is not available on all models.
To use cellular services, you must have a subscription to the function with a mobile phone network
service. In most cases, the settings of the cellular services are installed automatically.
To turn on or off the cellular services:
1. Open the All Apps screen and tap Settings  Network & internet  Mobile network.
2. Tap the Mobile data switch to turn it on or off.
If you are on a limited data allowance, you can monitor the data usage on the device: open the All
Apps screen and tap Settings  Network & internet  Mobile network  Data usage.
Note: Turn off the cellular services when not in use to save battery power.

Wireless Network Connection

To use wireless local area networks (WIFI) on your device, you need access to a wireless access point
(AP) or "hotspot."
Note: The coverage of the WIFI signal can be up to 300 feet (100 metres). However, it varies greatly due to the type of infrastructure, and other
objects through which the signal passes.

Connecting to a Wireless Network

1. Open the All Apps screen and tap Settings  Network & internet.
2. Tap the WIFI switch to turn it on. The device will automatically scan for available wireless networks.
3. Tap a wireless network to connect.
4. If you select an open network, you will be automatically connected to the network. If you select a
secured network, enter the key and then tap CONNECT.
5. When your device is connected to a wireless network, the WIFI icon (
bar.
The next time your device connects to a previously accessed secured wireless network, you will not
be prompted to enter the key again, unless you reset the network settings or reset your device to its
factory default settings.
Note: Turn off the WIFI function when not in use to save battery power.

Removing a Remembered Network

1. Open the All Apps screen and tap Settings  Network & internet  WIFI.
2. Tap and hold the network to remove on the list, and select Forget network.

Bluetooth

Bluetooth is a short-range wireless communications technology that allows Bluetooth-enabled devices
to exchange information over a distance of about 30 feet (10 metres) without requiring a physical
connection.

Pairing with Another Bluetooth Device

1. Make sure that the Bluetooth function of the other device is turned on.
2. Open the All Apps screen and tap Settings  Connected devices  Pair new device.
) will appear in the status
15