Back Panel - Belkin N150 User Manual

GETTING TO KNOW YOUR ROUTER

Back Panel

Reset Button
This button is used to restore the factory default settings.
To reset the Router, press and hold this button for 8-10 seconds.
Power Connector
Connect the included power supply to this jack.
Modem (WAN) Connector
Connect your modem to this port using an Ethernet cable.
Wired (LAN) Connectors
Connect computers and other wired network device
to these ports using Ethernet cables.
WPS Button
The WPS button on the back of your Router can be used to help
establish a secure connection between your Router and other WPS-
enabled Wi-Fi devices such as computers. To use the WPS feature on
your Router, see "Getting Started > Adding Computers to Your Network
> Using the WPS Button".
11