Young children should be carefully supervised when they It is essential that the fireplace, vent and complete venting are in the same room as the appliance. Toddlers, young are cleaned and inspected annually by a Lyric dealer. children and others may be susceptible to accidental...
Table of Contents Fireplace Safety Information and Warnings ....................1 10-Button Handset ............................3 Operating Instructions ..........................3 Turning the Fireplace On ........................3 Turning the Fireplace Off ........................4 Flame Height Adjustment ........................4 Designated Low Flame Setting ......................4 Designated High Flame Setting ......................5 Countdown Timer ..........................5 Setting the Time ...........................5 Setting Fahrenheit or Celsius ........................6 Setting Child Proof Function .........................6...
10-Button Handset Control Option Radio Frequency Power Supply Replace batteries after 2 years 918.0 MHz 2 x 1.5V AAA batteries 10-Button Handset or when low battery indicator (U.S. & Canada) (quality alkaline recommended) appears on handset display NOTE: Any device that functions using the same radio frequency as the handset will be affected when handset is in use.
Turning the Fireplace Off 1. Press button to turn the fireplace off. NOTE: The fireplace may be turned on again after the OFF icon stops flashing. Flame Height Adjustment 1. To increase flame height, press and hold button to desired flame height. 2.
Designated High Flame Setting 1. To go to designated high flame setting, double-click button. 2. HI is displayed. Countdown Timer ON/SETTING: 1. Press and hold button until is displayed and hour flashes. 2. To select hour, press button. 3. To confirm press button.
Setting Fahrenheit or Celsius 1. To change between °C and °F, press buttons simultaneously. NOTE: Choosing °F will switch to a 12-hour clock. Choosing °C will switch to a 24- hour clock. Setting Child Proof Function 1. To activate, press buttons simultaneously.
Thermostatic Mode: Turn On and Off 1. Press button. will appear in the display. Preset temperature will appear briefly, and then room temperature will appear. OFF: 3. Press button. 4. Press button to enter Manual Mode. 5. Press button to enter Program Mode. 6.
Program Mode: Turn On and Off 1. Press button. , 1 or 2, ON or OFF will appear on the display. OFF: 1. Press button. 2. Press button to enter Manual Mode. 3. Press button to enter Thermostatic Mode. 4. Press button to enter Eco Mode.
Page 10
Program Mode: Day Setting (steps continued from TEMPERATURE SETTING section above) 5. ALL will appear on the display. Press button to choose between ALL, SA:SU, 1, 2, 3, 4, 5, 6, 7. 6. To confirm, press button. ON TIME SETTING (PROGRAM 1): , 1, ON is displayed, ALL is displayed shortly, and hour flashes.
Program Mode: SA:SU or Daily Timer (1, 2, 3, 4, 5, 6, 7) selected Set ON time and OFF time using the same procedure as “ALL selected” (above). • SA:SU: Set ON time and OFF time for both Saturday and Sunday. •...
AC adapter according to the myfire App setup diagram, and the app setup must be completed. NOTE: If you have any questions or concerns about the operation of your fireplace, please contact an authorized Lyric dealer for assistance. Puck Handset Control Option...
NOTE: Flame goes to High Flame before going to Low Flame. Designated High Flame Setting • To go to designated high flame setting, double-click + button. NOTE: If you have any questions or concerns about the operation of your fireplace, please contact an authorized Lyric dealer for assistance.
Wall Switch Control Option Radio Frequency Power Supply 918.0 MHz Wall Switch (U.S. & Canada) Operating Instructions Instructions for operating the Wall Switch are shown below. Turning the Fireplace On/Off • Press and hold the ON-OFF button until two short beeps confirms the start sequence has begun;...
Flame Height Adjustment INCREASE: • To increase flame height, press and hold (up flame) button. DECREASE: • To decrease flame height, press and hold (down flame) button. • Holding the (down flame) button long enough sets the fireplace to pilot flame (Standby Mode).
5. Return to App. LOGIN 1. Fill in your registration password. 2. Accept “Terms and Conditions”. 3. Touch the “Login” button. Kwik Connect If KWIK Connect is not available, skip to “Standard Setup” instructions below. CONNECT SMART DEVIDE TO MYFIRE WI-FI BOX 1.
Need help?
Do you have a question about the Lyric and is the answer not in the manual?
Questions and answers