To Receive - Uniden Bearcat PC78 Elite Setup Manual

UC343FH 10/23/03

To Receive

Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
1. Turn unit ON and set
VOLUME Control to a
comfortable level.
2. Select CHANNEL.
3. Set switch to NB/ANL.
Dynamic Squelch Control automatically sets Squelch to the optimal level
for stronger transmission and signal clarity. To scan for weaker signals,turn
Dynamic Squelch Control off and perform the following steps:
4a. Turn SQUELCH fully clockwise so
only strong signals can get through.
4b. Turn SQUELCH fully counter
clockwise until you hear a hiss.
Everything gets through - noise,
weaksignals, and strong signals.
4c. Turn SQUELCH back clockwise until
the hiss stops. Only clearer signals get
through.
2:32 PM Page 6
6