Front led sidemarker lights for dodge challenger (2 pages)
Summary of Contents for American muscle 94365
Page 1
Center Console Arm Rest Pad Titanium Gray (87-93 All) Install Time: Approximately 5 min Tools Required: Phillips Screwdriver Removal Procedure: Step 1: Start by opening the center console arm rest.
Page 2
Step 2: Next taking the Phillips screwdriver unscrew the screws holding the armrest pad onto the trim and Armrest bracket, There should be 4 total. Step 3: Once removed the arm rest pad and trim should be free to pull off the bracket.
Page 3
Step 4: After bottom holes are lined up take the two remaining screws and screw them in, Not to tight remember it is plastic, and finish tightening the two top screws. Step 5: Enjoy your new Arm rest pad Installation Instructions written by AmericanMuscle Customer Vance Clark 8.17.2014...
Need help?
Do you have a question about the 94365 and is the answer not in the manual?
Questions and answers