Disassembling The Dsp Board - Pioneer DJ XPRS Service Manual

X4 | SERVICE MANUAL Pioneer DJs XPRS | SERVICE MANUAL
Now the Faulty Module is able to remove & replace with a New
Module.

9.2 Disassembling the DSP Board

Unplug the 3 Cables connected to the Module.
(highlighted in Green)
Unplug the Flat Cable by gently pulling on the connector's sides.
(highlighted in Blue)
Remove the 8 nuts & washers by an M7 Socketed Screwdriver.
(highlighted in Yellow)
Unplug the Cable (highlighted in Green)
Now the DSP Board is able to access.
14