UNICOM 802.11b+g User Manual page 32

MAC Address Filter
Bridge Adapter
Click Setting and you will see the following
figure. You can select the Filter Type from the
pull-down menu.
Disable：Select to disable the filter function.
Accept：You can type in 15 MAC addresses by
clicking Change. If you select Accept, then the
MAC address(es) you type in will be connected
to the AP.
Reject：You can type in 15 MAC addresses by
clicking Change. If you select Reject, then the
MAC address(es) you type in will not be
connected to the AP.
The stations will not be allowed to connect to the
internet if you select No bridge.
The stations will be allowed to connect to the
internet if you select the device listed in the
pull-down menu.
-
29 -