Nordmende FHD24A Manual page 35

8 Menu Operation
1.Picture Mode
Press ▼ / ▲ button to select Picture Mode, then press OK button to enter sub-menu.You can
change the value of contrast, brightness, colour, sharpness and tint when the picture is in
Personal mode.
2.Contrast/ Brightness/ Colour/ Tint / Sharpness
These settings can only be adjusted when the Picture Mode is set to User.
Press ▼ / ▲ button to select option, then press ◄ / ► button to adjust.
3.Colour Temp
Press ▼ / ▲ button to select Colour Temp , then press OK button to enter sub-menu.
Press ▼ / ▲button to select. (Available Picture mode: Cold, Normal, Warm).
4.Noise Reduction
To filter out and reduce the image noise and improve picture quality.
Press ▼ / ▲ button to select Noise Reduction, then press OK button to enter sub-menu.
5.HDMI Mode
Press ▼ / ▲ button to select HDMI Mode , then press OK button to enter sub-menu.
1.Sound Mode
Select the sound mode that you feel comfortable with.The value of Treble and Bass are only
available in User mode,you can adjust them as you like.
2.Treble/Bass
Press ▼ / ▲ button to select option, Press ◄ / ► button to adjust.
The treble and bass are only available in User mode,you can adjust them as you like.
3.Balance
Press ▼ / ▲ button to select option, Press ◄ / ► button to adjust.
4.Auto Volume Level
Press ▼ / ▲ button to select Auto Volume Level, then press OK button to select On or Off.
5.SPDIF Mode
Press ▼ / ▲ button to select SPDIF Mode, then press OK button to select Off / PCM / Auto.
6.AD Switch
Press ▼ / ▲ button to select AD Switch, then press OK button to select On or Off. Amblyopia
function for the blind, the tracks will be mixed describe the current screen . It needs coldstream
to support.
NOTE:
Balance:This item can adjust the speaker's output, it enables you to listen to best at your position.
Auto Volume: This item is used for reducing the difference between channel and program's
volume automatically.
14