Inserting Remote Control Batteries; Operating The Remote Control; Using The Remote Control 6 - Nordmende FHD24A Manual

Inserting Remote Control Batteries

1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
CAUTION
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose a
risk of fire or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result
in leakage, which may pose a risk of fire or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not be used for an extended period, remove the batteries.

Operating the Remote Control

1 .Aim Remote Control directly at the
Remote Control Sensor on the left
down corner of the TV set.
2 .Remote Control range is at approx.
10 meters with angles of approx.30 degree.
3. Avoid obstructions between the
Remote Control and the sensor.
☼If you do not intent to use the remote control
for a long time, remove the batteries.
☼If the remote control does not operate
correctly, or if the operating range .
reduced,replace both batteries with new ones.

Using the Remote Control 6

IR Receiver
9
30 30
P.MODE S.MODE FAV SLEEP
FREEZE CH.LIST AUTO ASPECT
1 2 3
4 5 6
7 8 9
-/-- 0
MENU EXIT
SOURCE DISPLAY
+ +
TEXT EPG
CH VOL
- -
Audio SUBTITLE
INDEX HOLD SIZE REVEAL
TIMESHIFT LIST
SUBPAGE