Subscribe to Our Youtube Channel
Related Manuals for Clarke Weld WSC2
Summary of Contents for Clarke Weld WSC2
- Page 1 WELDING SCREEN FRAME MODEL NO: WSC2 PART NO: 6000945 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC 0620 - ISS 4...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE Welding Screen Frame. Use this screen for face, eye and general protection against harmful rays, sparks and splatter from welding and cutting. Additional WSC2 screens can be added by using the connecting tubes supplied.
- Page 3 COMPONENT PARTS Top/bottom tubes Top corner tubes Bottom corner tubes Side tubes Welding screen connecting tubes Base supports Castors (2 with parking brakes) Wingnuts Castor domed nuts Welding screen SPECIFICATIONS Weight 5.35 kg Dimensions (D x L x H) 660 x 1795 x 1965 mm Parts &...
- Page 4 ASSEMBLY 1. Connect the top/bottom tubes (A) to the corner tubes (B & C), noting that the limb of (C) must point downwards. • The spring-loaded pins on the tubes will spring into place for security. 2. If required, for creating a fence of screens, slide the welding screen connecting tubes (E) onto the side tubes (D) until they rest against the lower of the two spring loaded pins.
Need help?
Do you have a question about the Weld WSC2 and is the answer not in the manual?
Questions and answers