Advertisement
Wiring connection
▪
External connector on the body
Connect to Electric screw driver and external power supply as follows;
PIN9 ［ IN1 ］
PIN11 ［ I/O power ］ → 5V~24V±10%
PIN12 ［ I/O GND ］
※If the AC adapter is not directly connected to the main body, supply power from pin1 and 2.
PIN1 ［ Power GND ］ → GND for the unit
PIN2 ［ Power input ］→ Power for the unit 12, 24V±10％
▪
External cable
Please prepare the cable side.
*Please refer to page 26 of
→ EXTIN
→ I/O GND
Operating Instructions
about connector.
4
Advertisement
