Get Started; Charge The Built-In Battery; Turn On/Off - Philips JS30 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Charge the built-in battery

T h e s p e a k e r i s p o w e r e d b y a b u i l t - i n
rechargeable battery.
Note
• Fully charge the built-in battery before using.
• When the speaker is turned on and the battery
is low, the battery level LED indicator blinks red
quicky.
Connect the TYPE-C USB socket on the speaker
to an outlet (5V 3A) by using the provided
USB cable.
When the speaker is being charged,
the LED indicator is solid red.
When the speaker is fully charged, the
LED indicator is blue if turn on the
speaker.
4
EN
Caution
• Risk of speaker damage! Make sure that the
power supply voltage corresponds to the voltage
of the unit. (There is a rating label on the back
of the unit. You may refer to the illustration on
Page 2 for its position.)
• Risk of electric shock! When unplug the USB
cable, always pull the plug from the socket. Never
pull the cable.
• Use only a USB cable specified by the
manufacturer or sold with this speaker.

Turn on/off

Press to turn the speaker on.
You will hear the prompt sound.
The LED indicator will blink blue.
To turn the speaker off, press
Note
• The speaker will turn off automatically after 15
minutes without audio signal from Bluetooth.
again.