Pre-Maintenance Procedures; Releasing The Mower-Deck Curtain; Removing The Sheet-Metal Guard - Toro Z Master Professional 7000 Series Operator's Manual

Important:
Refer to your engine owner's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug(s) before you do
any maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Pre-Maintenance
Procedures
Releasing the Mower-Deck
Curtain
Loosen the bottom bolt of the curtain to release the
mower-deck curtain and access the top of the mower
deck (Figure 30). Tighten the bolt after maintenance
to install the curtain.
Figure 30
1. Bolt
g027945
2. Curtain
Removing the Sheet-Metal
Guard
Loosen the 2 front bolts and remove the sheet-metal
guard to access the mower belts and spindles
31). Place the sheet-metal guard and tighten the bolts
after maintenance.
1. Sheet-metal guard
32
Figure 31
2. Bolt
(Figure
g027946