Bios - Gigabyte W480 VISION W User Manual

2-7

BIOS

& Bootup NumLock State
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)
& Security Option
Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.
After configuring this item, set the password(s) under the Administrator Password/User Password item.
A password is only required for entering the BIOS Setup program.
Setup
A password is required for booting the system and for entering the BIOS Setup program.
System
(Default)
& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
& Boot Option Priorities
Specifies the overall boot order from the available devices. Removable storage devices that support GPT
format will be prefixed with "UEFI:" string on the boot device list. To boot from an operating system that
supports GPT partitioning, select the device prefixed with "UEFI:" string. Or if you want to install an operating
system that supports GPT partitioning such as Windows 10 64-bit, select the optical drive that contains the
Windows 10 64-bit installation disc and is prefixed with "UEFI:" string.
& Fast Boot
Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup
speed. (Default: Disable Link)
& SATA Support
Last Boot SATA Devices Only
All SATA Devices All SATA devices are functional in the operating system and during the POST.
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
Except for the previous boot drive, all SATA devices are disabled
before the OS boot process completes. (Default)
- 42 -