DecaLED Controller 3 Mini Manual

Description
Read this manual carefully before using our DecaLED
a control interface and power for DecaLED
be controlled separately, only a maximum loading capacity of 3A(1A per individual channel) is allowed on a
single output and the maximum amount of the total load can not exceed 4A distributed over all 2 outputs.
Package contents
1 x DecaLED Controller 3 Mini
®
1 x DecaLED Control Remote (Infrared Remote Control)
®
1 x IR EYE sensor(External connected infrared receiver sensor)
1 x Connection cord for the power supply
1 x Manual
Carefully unpack the carton. Check the contents to ensure that all parts are present and have been received
in good condition. If any parts appear damaged or missing, notify the shipper immediately and retain packing
material for inspection. In the event that the fixture must be returned to the factory, it is important that the
fixture is returned in the original factory box and packaging.
Features
USITT Standard DMX-512(1990) multiplexed digital control.
A maximum of 6 channels (2x RGB channels) can be controlled separatelyseparately, only a maximum
loading capacity of 3A(1A per individual channel) is allowed on a single output and the maximum amount of
the total load can not exceed 4A distributed over all 2 outputs.
Available in DecaLED
and IR Control Mode.
In DecaLED Setup Tool Control Mode, available in Slave Control mode(DMX Mode) and Master mode.In
®
DMX Mode, allows to configure different load output modes as needed, consisting of RGB mode, Color
mode, Color &Brightness mode and Single mode. In Master Mode, available in Manual Mode and Auto
Mode,allows to select 1~10 patterns plus a sequence of 10 patterns with chase speed & fade time.
In Full DMX Control Mode, allows to set up DMX starting address.
In Stand Alone(Manual) Mode, built-in 1~8 patterns selection with chase speed & fade time is available by
configuring the dip switch.
In IR Control Mode, allows to set work modes and relative parameters with LED Remote control operation. Built-
in IR and external connected IR EYE sensor are optional. R.G.B. Color intensity can be adjustable separately.
And 1~10 patterns plus a sequence of 10 patterns selection with chase speed & fade time is available.
Improvements and specifications in the design of the unit and the manual are subject to change without any
prior written notice.
Setup Tool Control Mode, Full DMX Control Mode, Stand Alone Mode(Manual)
®
DecaLED
Controller 3 Mini. The DecaLED
®
24V products. A maximum of 6 channels (2x RGB channels) can
®
DecaLED Controller 3 Mini
Controller 3 Mini
®
Controller 3 Mini provides
®
for 24V
Product Code:95350246
www.decaled.com
on
DMX Address (Slave) ON RS Stand Alone
(Dip Switches 10 = on) (Dip Switches 10 = off)
1 2 3 4 5 6 7 8 9 10
Start Start Fade Time
Switches On
Switches On
CH# CH#
on
1 2 3
1,2,4
1 1 11
3,4
2 2 12
3 1,2 13 1,3,4 000
2,3,4
4 3 14 100
1,2,3,4 010
5 1,3 15
6 2,3 : : 110
:
7 1,2,3 : 001
: 101
8 4 :
: 011
9 1,4 :
111
10 2,4 511 1,2,3,4,5,6,7,8,9
95350246
Manual
Controller 3 Mini
for 24V
Product code: 95350246
SETUP TOOL
on
ON RS
1 = ON
1 2 3 4 5 6 7 8 9 10 11
Speed Program 0= OFF
on on
4 5 6 7 8 9
0 Dip Switches
1 Setup tool
0% 000 0.1S 000 1
IR
: 100 0.2S 100 2
: 010 0.5S 010 3
1 = ON
12
: 110 1S 110 4
0= OFF
: 5
001 5S 001
: 101 10S 101 6
0 IR OFF
: 011 20S 011 7
100% 111 30S 111 Auto 1 IR ON