Advertisement
Available languages
Available languages
USAGE NOTES / FUNCTIONS
ATTENTION!
- Do not underestimate the weight of the loudspeakers
- Placement and extension of the loudspeakers must be carried out by
-
physically fit technicians
- Firmly grasp the distance rod when adjusting the height to the desired
-
position and lock the locking pin
ATTACH LOUDSPEAKER TO THE STAND
4 Turn the Mandrel Locking Ring to the right (Direction OPEN),
4
to be able to set the system to the smallest diameter
5 Place the loudspeaker on the extension rod (directly or with a K&M-Adapter)
6 Now turn the locking ring to the left (Direction CLOSE) until the
6
mandrels lock into place
CHANGE THE DIRECTION OF THE LOUDSPEAKERS
- Open locking ring 4 (Direction OPEN),
-
and turn the loudspeaker in the desired direction
- Tighten locking ring 6 (Direction CLOSE)
MOVING THE SPEAKER (LOAD)
Technicians:
FP - first person: operates the distance rod 7
FP - first person:
with the weight
SP - second person: operates the clamping screw 8,14
SP - second person:
and locking pin 9,11 of the clamping bracket
Order when extending the rod:
FP - 7 holds the distance rod
SP - 8 loosens the clamp screw and holds it
SP -
9 pulls the locking knob until the locking pin
SP - 3
is no longer in the locked position
FP - 10 lifts the distance rod and loudspeaker
FP - 10
to the desired height;
FP - 10
TIP:
FP - 10
positioned it just above
FP - 10
the clamping bracket
SP - 11 lets go of the locking knob,
SP - 11
so that the pin can click into the distance rod
FP - 12 slowly lowers the distance rod
FP - 12
so that the locking pin locks into the hole
FP - 13 NOTE: this is in the proper positing
FP - 13
when the clicking sound is heard
FP - 13
the operating button must be in the
FP - 13
hexagonal hole
SP - 14 loosens the clamp screw
ZP - 14
(manual strength is enough)
RETRACTING THE WEIGHT
When retracting the weight the
reverse order applies.
IMPORTANT:
Ensure that second person tightens the
clamping screw 14 immediately in the
event that the first person is not able to hold
the distance rod.
Advertisement
